• Admission

    {tab=Bachelor of Technology Degree (B-Tech)}

    {slider=Bachelor of Technology (B-Tech) Degree in Civil Engineering (Regular and Weekend) (2 years top-up)}

    Entry Requirements

    The entry requirements for the programme is an HND (Civil Engineering) certificate or allied programmes and a minimum of two years industrial experience. Preference would be given to first and second class upper holders.

    {/slider}

    {slider=Bachelor of Technology (B-Tech) Degree in Electrical/Electronic Engineering (Regular and Weekend) (2 years top-up)}

    Entry Requirements

    (i) The B-Tech degree programme is a top-up programme designed for holders of the Higher National Diploma (HND) Certificate in Electrical and Electronic Engineering or related field. To be eligible for the B-Tech in Electrical/ Electronic Engineering programme, candidates must hold a good HND certificate (Second Class Upper Division or better) with two years relevant post-qualification experience. Candidates with second class lower division must pass a selection interview to be conducted by the Technical University in additional to two years post qualification experience in a relevant field.

    Electrical Technicians Course Part III or Part II old scheme holders with four (4) or three (3) credit passes including Electrical Principle, Electrical Regulations, Electrical Practical and Electrical Drawingplus four (4) G. C. E ‘O’ Level passes (English, Mathematics) and any other two subject

    OR

    Final Electrical Technicians Course as stated above plus two (2) or more credit passes of SSCE/WASSCE (SHS) (English and Mathematics).

    Applicants admitted based on entry requirements (ii and ii) are supposed to go through some bridging course or Pre - BTech programme organized by the department and pass the stipulated courses before enrolled fully on the BTech programme.

    {/slider}

    {slider=Bachelor of Technology (B-Tech) Degree in Mechanical Engineering (Regular and Weekend) (2 years top-up)}

    Entry Requirements

    (i) The B. Tech degree programme is a top-up programme designed for holders of the Higher National Diploma (HND) Certificate in Mechanical Engineering or related field. To be eligible for the B. Tech in Mechanical Engineering programme, candidates must hold a good HND certificate (Second Class Upper Division or better) with two years relevant post-qualification experience. Candidates with second class lower division must pass a selection interview to be conducted by the Technical University in addition to two years post qualification experience in a relevant field.

    Mechanical/Motor Technicians Course Part III or Part II old scheme holders with four (4) or three (3) credit passes in the relevant courses plus four (4) G. C. E ‘O’ Level passes (English, Mathematics) and any other two subject

    OR

    Mechanical/Motor Technicians Course as stated above plus two (2) or more credit passes of SSCE/WASSCE (SHS) (English and Mathematics).

    Applicants admitted based on entry requirements (ii and iii) are supposed to go through some bridging course or Pre – B. Tech. programme organized by the department and pass the stipulated courses before enrolled fully on the B. Tech. Programme.

    {/slider}

    {tab=Higher National Diploma (HND)}

    {slider=Available Programmes}

    HND Civil Engineering
    HND Electrical/Electronic Engineering (Computer Engineering Option)
    HND Electrical/Electronic Engineering (Medical Engineering Technology Option)
    HND Electrical/Electronic Engineering (Power Systems Option)
    HND Electrical/Electronic Engineering (Telecommunication Options)
    HND Materials Engineering
    HND Mechanical Engineering (Automobile Option)
    HND Mechanical Engineering (Plant Option)
    HND Mechanical Engineering (Production Option)
    HND Mechanical Engineering (Refrigeration and Air-Conditioning Option)

    {/slider}

    {slider=Admission Requirement}

    Admission is opened to:

    SSSCE holders with credit passes (A-D) in English Language, Mathematics and Integrated Science/Social Studies plus credit passes (A-D) in Three Elective subjects relevant to the programme of study

    WASSCE holders with credit passes (A1-D7) in English Language, Mathematics and Integrated Science/Social Studies plus credit passes (A1-C6) in Three Elective subjects relevant to the programme of study

    CERTIFICATE II HOLDERS: Certificate II Applicants with Passes in six (6) subjects comprising three (3) core subjects (English, Mathematics and Integrated Science/Social Studies) plus three (3) passes in relevant elective subjects are eligible for HND Programmes

    ADVANCED LEVEL holders with credit in at least Five (5) subjects at the GCE ‘O’ Level (or its equivalent) including English and Mathematics, plus at least two passes in the subjects relevant to the programme of study.

    TECHNICAL SCHOOLS APPLICANTS: Technical School applicants with Passes in English Language, Mathematics, Integrated Science plus three (3) relevant elective subjects.

    POST SECONDARY TEACHER TRAIN ING CERTIFICATE APPLICANTS: Passes at the final Post–Secondary Teacher Training Examination plus five passes at the GCE O’Level/SSSCE/WASSCE including English and Mathematics.

    MATURE APPLICANTS

    Must be at least 25 years old.
    Must have at least two (2) years relevant industrial experience.
    Must pass a written examination and an interview.
    Must show proof of date of birth with any national document which is at least 5 years old at the time of application.

    OR

    Must be at least 25 years old
    Must have at least two (2) years relevant industrial experience.
    Must show proof of credit passes in English Language and Mathematics in SSSCE/WASSCE
    Must show proof of date of birth with any national document which is at least 5 years old at the time of application.

    MATURE CANDIDATES ENTRANCE EXAMINATION

    Note: All mature candidates will be expected to pay an additional amount of GH¢50.00 on or before the day of the entrance examination at the Technical University Campus. This amount covers the cost of the entrance examinations. Mature Candidates Entrance Examination will take place on Friday, July 28, 2017 at the Sunyani Technical University. The starting time for the examination is 10:00 a.m. prompt.

    {/slider}

    {tab=Pre-HND (Access)}
    PRE-HND (ACCESS) COURSE FOR TECHNICAL AND VOCATIONAL SCHOOL STUDENTS

    The National Board for Professional and Technicians Examinations (NABPTEX) has designed an access programme for Technical/Vocational Institute graduates into HND programmes. NABPTEX will conduct a final external examination after which successful applicants shall proceed to enroll in the following HND programmes:

    {slider=Available Programmes}

    HND Building Technology
    HND Civil Engineering
    HND Computer Science
    HND Electrical/Electronic Engineering
    HND Materials Engineering
    HND Mechanical Engineering

    {/slider}

    {slider=ENTRY REQUIREMENTS FOR PRE-HND COURSES}

    Applicants should posses a minimum qualification of Intermediate Certificate or its equivalent in the relevant area of study.

    ACCESS PROGRAMME FOR SSSCE/WASSCE

    In the case of SSSCE/WASSCE Science applicants for Access course, they must have passes in three (3) subjects comprising at least one (1) core subject plus at least one (1) science elective subject and any other science related subject.

    {/slider}

    {tab=Technician Certificates}

    {slider=Available Courses}

    Construction Technicians Course (CTC) Part I
    Construction Technicians Course (CTC) Part II
    Construction Technicians Course (CTC) Part III
    Electrical Engineering Technicians (EET) Part I
    Electrical Engineering Technicians (EET) Part II
    Electrical Engineering Technicians (EET) Part III
    Mechanical Engineering Technicians (MET) Part I
    Mechanical Engineering Technicians (MET) Part II
    Mechanical Engineering Technicians Part III
    Motor Vehicle Technicians (MVT) Part I
    Motor Vehicle Technicians (MVT) Part II
    Motor Vehicle Technicians Part III (MVT III)

    {/slider}

    {slider=Entry Requirements}

    Passes in Intermediate, SSSCE/WASSCE, Part I and Part II of that particular programme.

    {/slider}

    {tab=COTVET}

    The Faculty also runs programmes of the Council for Technical and Vocational Education and Training (COTVET) at the Certificate II and Advanced levels.

    {slider=Available Programmes}

    Electrical Installation Work
    Electrical Machine Rewinding and Repairs
    Fabrication and Welding
    Heavy Duty and Diesel Mechanics
    Industrial Maintenance Technology
    Industrial Mechanics
    Mechanical Engineering Craft Practice
    Motor Vehicle Mechanics Work
    Refrigeration & Air-conditioning Mechanics
    Small Engines Repairs

    {/slider}

    {slider=Entry Requirements}

    SSSCE/WASSCE and JHS certificates

    {/slider}

    {tab=Sales}

    {slider=Sales Outlets}
    Prospective Applicants must purchase Sunyani Technical University ADMISSIONS FORMS from the following centres:

    The Finance Office, Sunyani Technical University
    Regional and District POST OFFICES throughout the country
    Fidelity Bank, Zenith Bank, Ghana Commercial Bank, Ecobank, Stanbic Bank, Sunyani and all other Branches throughout the Country.

    {/slider}

    {slider=Cost of Application Forms}

    Bachelor of Technology Applicants                                                         - GH¢130.00
    HND Programmes (Direct Applicants)                                                    - GH¢120.00
    HND Programmes (Mature)                                                                    - GH¢130.00
    Access (Pre-HND), Diploma, Technician and Advanced Programmes  - GH¢120.00
    Craft programmes and Proficiency Certificates                                      - GH¢80.00

    {/slider}

    {tab=Apply}

    ONLINE ADMISSION INSTRUCTIONS

    Go to admissions.stu.edu.gh on the internet after you have purchased the Sunyani Technical University admissions documents

    Log onto the Online Admissions System with the E-Voucher Number and Pin
    Follow steps on the Online Admissions system to complete your application

    A printed copy of your completed online application must be enclosed in your envelope before posting together with photocopies of Certificates or Results slips to be returned to: The Registrar, Sunyani Technical University, P. O. Box 206, Sunyani

    COMPLETED FORM

    A completed ADMISSION FORM should be sent to the Post Office together with photocopies of certificates or result slips and in the case of Mature Applicants, birth certificates and any other relevant document(s) should also be attached and sent to the address below:

    THE REGISTRAR,
    SUNYANI TECHNICAL UNIVERSITY,
    P.O. BOX 206,
    SUNYANI - B/A

    Click Here to Access The Online Application System

    For general enquiries contact the Deputy Registrar in-charge of Academic and Admissions on 0352023278/0352027052 or 0264485858
    {/tabs}

  • Civil Engineering Students Doing Practical Works
    Civil Engineering Students Doing Practical Works
  • Mechanical Engineering Students At the LAB
    Mechanical Engineering Students At the LAB
  • A GE MAX Levelling Instrument
    A GE MAX Levelling Instrument
  • Electrical Engineering Students working at the LAB
    Electrical Engineering Students working at the LAB
  • Rotary Sponsored Computer LAB
    Rotary Sponsored Computer LAB
  • Electrical Engineering Students
    Electrical Engineering Students

The Electrical Engineering department is the oldest department and has train several individuals working in various sectors including the Power industry,Telecom industry, Mining, Hospitals etc.The available options are Power, Telecom, Biomedical and Computer Engineering

Electrical

The Mechanical Engineering Department is one of the oldest in the University. The Department offers up-to-date training in Mechanical Engineering for the nation’s vibrant youth from the basic training to the higher level manpower. It has options in Plant, Automobile and Plant.

Mechanical

The Department of Civil Engineering is one of the fastest growing Departments running tertiary programmes.The Department is one of the resource centres in the training of personnel in the field of Construction, Environmental and Water Resources Management

Civil

The Material Engineering section is a new section under Civil Engineering with the aim of training students in the current trends in material engineering and equipping student with the best skills possible to take up opportunities in the Country. The section currently runs only HND, Material Engineering

Material

Partners

Research

Projects

About Us